how many valence electrons are there in h3n -ch2-cooh

Answers

Answer 1

The valence electrons of each atom in [tex]H_{3}N[/tex] and [tex]-CH_{2}-COOH[/tex], we get a total of: 8 + 18 = 26 valence electrons.

To determine the number of valence electrons in a molecule, we need to add up the valence electrons of each atom in the molecule.

For [tex]H_{3}N[/tex], we have:

Hydrogen (H) has 1 valence electron x 3 atoms = 3 valence electrons

Nitrogen (N) has 5 valence electrons x 1 atom = 5 valence electrons

Total number of valence electrons for [tex]H_{3}N[/tex] = 3 + 5 = 8

For [tex]-CH_{2}-COOH[/tex], we have:

Carbon (C) has 4 valence electrons x 1 atom = 4 valence electrons

Hydrogen (H) has 1 valence electron x 2 atoms = 2 valence electrons

Oxygen (O) has 6 valence electrons x 2 atoms = 12 valence electrons

Total number of valence electrons for [tex]-CH_{2}-COOH[/tex] = 4 + 2 + 12 = 18

Adding the valence electrons of each atom in [tex]H_{3}N[/tex] and [tex]-CH_{2}-COOH[/tex], we get a total of:

8 + 18 = 26 valence electrons.

To know more about valence electrons, refer here:

https://brainly.com/question/12717954#

#SPJ11


Related Questions

What is the H₂: H₂O molar ratio?

Answers

Answer:

The mole ratio between O₂ and H₂O is 1molO₂2molH₂O . The mole ratio between H₂ and H₂O is 2molH₂2molH₂O .

Explanation:

Answer:

Explanation:

2molH₂2molH₂O

An example of a glycerophospholipid that is involved in cell signaling is: a. phosphatidylinositol. b. arachidonic acid. c. testosterone. d. ceramide.

Answers

An example of a glycerophospholipid that is involved in cell signaling is phosphatidylinositol.

Glycerophospholipids are one of the major classes of lipids found in cell membranes. They consist of a glycerol backbone, two fatty acid chains, and a polar head group. Phosphatidylinositol is a glycerophospholipid that is particularly important in cell signaling. It is a precursor for a number of signaling molecules such as inositol triphosphate (IP3) and diacylglycerol (DAG) that regulate important cellular processes such as calcium signaling and protein kinase C activation. Phosphatidylinositol is also involved in the regulation of cell growth, differentiation, and apoptosis. Overall, glycerophospholipids are essential components of cell membranes and play critical roles in maintaining cell structure and function, as well as in signaling processes that help to coordinate cell behavior.

To know more about glycerophospholipid visit:

brainly.com/question/14090272

#SPJ11

the mass of a proton is 1.673 ¥ 10-27 kg, and the mass of a neutron is 1.675 ¥ 10-27 kg. a proton and neutron combine to form a deuteron, releasing3.520 ¥ 10-13 j. what is the mass of the deuteron? 113xID (B) 3.348 x 107 kg 5x 10 3.344 x 1027 kg (c) 3.352 x 1027 kg (D) 3.911 x 10-30 kg 3.520ID 2015 MC

Answers

The mass of the deuteron is 3.344 x 10^-27 kg, which is answer choice (B).

The mass of the deuteron can be calculated using Einstein's famous equation E = mc^2, where E is the energy released, m is the mass of the system, and c is the speed of light.

First, we need to convert the energy released from joules to kilograms using the equation:

E = mc^2

m = E/c^2

m = (3.520 x 10^-13 J)/(2.998 x 10^8 m/s)^2

m = 3.911 x 10^-30 kg

This is the mass lost during the formation of the deuteron. Therefore, the mass of the deuteron is the sum of the masses of the proton and neutron minus the mass lost:

mass of deuteron = mass of proton + mass of neutron - mass lost

mass of deuteron = (1.673 x 10^-27 kg) + (1.675 x 10^-27 kg) - (3.911 x 10^-30 kg)

mass of deuteron = 3.344 x 10^-27 kg

For more question on deuteron click on

https://brainly.com/question/12837773

#SPJ11

A 300.-mL sample of hydrogen, H2, was collected over water at 21?C on a day when the barometric pressure was 748 torr. What mass of hydrogen is present? The vapor pressure of water is 19 torr at 21?C

Answers

The mass of hydrogen present in the 300 mL sample is approximately 18.14 grams. To determine the mass of hydrogen present in the sample, we need to account for the partial pressure of hydrogen and correct for the presence of water vapor.

The total pressure in the sample is the sum of the partial pressure of hydrogen and the vapor pressure of water:

Total pressure = Partial pressure of hydrogen + Vapor pressure of water

The partial pressure of hydrogen can be calculated using Dalton's law of partial pressures:

Partial pressure of hydrogen = Total pressure - Vapor pressure of water

Now, we can use the ideal gas law equation to calculate the number of moles of hydrogen:

PV = nRT

where:

P = Partial pressure of hydrogen (in atm)

V = Volume of hydrogen (in L)

n = Number of moles of hydrogen

R = Ideal gas constant (0.0821 L·atm/(mol·K))

T = Temperature (in Kelvin)

Let's convert the volume from milliliters to liters:

Volume of hydrogen = 300 mL = 300/1000 L = 0.3 L

Now, we can rearrange the ideal gas law equation to solve for the number of moles:

n = PV / RT

n = (729 torr * 0.3 L) / (0.0821 L·atm/(mol·K) * 294.15 K) [21°C converted to Kelvin]

Performing the calculation:

n = (218.7 torr·L) / (24.11 L·atm/(mol·K))

n ≈ 9.07 mol

Finally, we can calculate the mass of hydrogen using the molar mass of hydrogen (H₂):

Mass of hydrogen = Number of moles * Molar mass of hydrogen

Molar mass of hydrogen = 2 g/mol

Mass of hydrogen = 9.07 mol * 2 g/mol

Mass of hydrogen ≈ 18.14 g

Learn more about Dalton's law: https://brainly.com/question/30459983

#SPJ11

Which of the partial reactions below would occur at the cathode? Key Concept: The anode is where oxidation occurs while reduction occurs at the cathode. Mn2+ (aq) → MnO2(s) N2H5+ (aq) → N2(9) Cl(aq) → CIO"(aq) N2(g) → N2H4(aq)

Answers

The reduction reaction would occur at the cathode. Specifically, the partial reaction N₂H₅+ (aq) → N₂(g) would occur at the cathode as it involves the gain of electrons and reduction of the N₂H₅⁺ ion.

An oxidation reaction and a reduction reaction go hand in hand in redox processes. A redox reaction is called that because it involves an oxidising and a reducing substance. Since this means that all chemical reactions that involve a substance losing an electron are redox reactions and they occur in nearly all of chemistry, from synthetic to biological chemistry, the only answer that makes sense is:

N₂H₅+ (aq) → N₂(g)

The negative or reducing portion of the two electrodes reduction is called the anode. It undergoes its own oxidation and contributes electrons to the electrochemical process occurring in the solution. Sacrificial anodes are used to safeguard a variety of structures, including ship hulls, water heaters, pipelines, distribution systems, above-ground tanks, and subterranean tanks.

Learn more about Redox reaction here

https://brainly.com/question/30322738

#SPJ11

part b use bond energies to calculate the enthalpy of combustion of methanol in kj/mol . express your answer in kilojoules as an integer.

Answers

The enthalpy of combustion of methanol in kJ/mol can be calculated using bond energies. The value obtained is -726 kJ/mol.

What is the enthalpy of combustion of methanol in kJ/mol when calculated using bond energies?

The equation for the combustion of methanol is as follows:

CH₃OH + 1.5 O₂ → CO₂ + 2 H₂O

The bond energies of each bond involved in the reaction can be used to calculate the enthalpy change of the reaction. The enthalpy change can be expressed as:

ΔHrxn = Σ(bond energies of reactants) - Σ(bond energies of products)

For the combustion of methanol, the enthalpy change can be calculated as:

ΔHrxn = [4 × C-H bond energy + 1 × C-O bond energy + 3/2 × O=O bond energy] - [2 × O-H bond energy + 1 × C=O bond energy]

where the bond energies are expressed in kJ/mol.

Substituting the bond energies for each bond involved in the reaction, we get:

ΔHrxn = [(4 × 413) + (1 × 360) + (3/2 × 498)] - [(2 × 463) + (1 × 743)]

Simplifying this expression gives us the enthalpy change of the reaction:

ΔHrxn = -726 kJ/mol

Therefore, the enthalpy of combustion of methanol in kJ/mol, calculated using bond energies, is -726 kJ/mol.

Learn more about Enthalpy change

brainly.com/question/29556033

#SPJ11

A volume of hydrogen gas at 1.00 atm decreases from 0.250 L to 0.125 L. If the temperature remains constant, what is the final pressure?
(a) 0.250 atm
(b) 0.500 atm
(c) 1.00 atm
(d) 2.00 atm
(e) none of the above

Answers

The final pressure is 2.00 atm (Option d), determined by applying Boyle's Law: P1V1 = P2V2.

To find the final pressure of the hydrogen gas, we can apply Boyle's Law,

which states that the pressure and volume of a gas are inversely proportional when the temperature remains constant (P1V1 = P2V2).

In this case, the initial pressure (P1) is 1.00 atm, the initial volume (V1) is 0.250 L, and the final volume (V2) is 0.125 L.

We need to solve for the final pressure (P2):

1.00 atm * 0.250 L = P2 * 0.125 L
0.250 atm·L = P2 * 0.125 L
P2 = 0.250 atm·L / 0.125 L
P2 = 2.00 atm
Therefore, the correct option is d.

For more such questions on pressure, click on:

https://brainly.com/question/24719118

#SPJ11

Boyle's Law relates the pressure and volume of a gas at a constant temperature. Using P1V1 = P2V2 with initial pressure and volume of 1.00 atm and 0.250 L, respectively, and final volume of 0.125 L, we find a final pressure of 2.00 atm.

The problem can be solved using Boyle's Law, which states that the pressure and volume of a gas are inversely proportional, assuming constant temperature. Mathematically, this can be expressed as P1V1 = P2V2, where P1 and V1 are the initial pressure and volume, respectively, and P2 and V2 are the final pressure and volume, respectively.

Plugging in the given values, we get:

P1 = 1.00 atm

V1 = 0.250 L

V2 = 0.125 L

Solving for P2:

P2 = (P1 * V1) / V2

P2 = (1.00 atm * 0.250 L) / 0.125 L

P2 = 2.00 atm

Therefore, the final pressure is 2.00 atm.

learn more about Boyle's Law here:

https://brainly.com/question/1437490

#SPJ11

FILL IN THE BLANK Calculate the density of oxygen, O2, under each of the following conditions: STP 1.00 atm and 15.0 ∘C Express your answers numerically in grams per liter. Enter the density at STP first and separate your answers by a comma. density at STP, density at 1 atm and 15.0 ∘C = ________g/L

Answers

The density at STP is 1.429 g/L and density at 1.00 atm and 15 C is 1.354 g/L.

Density at STP

At STP 1 mole = 22.4 L

so density  = 32.0 g / 22.4 L = 1.429 g / L

Density at 1.00 atm  and 15.0 C

15.0 C + 273 = 288 K

Formula to calculate the density is as follows

PM= d RT

d= PM/RT

d= 1.00 atm * 32 g per mol / 0.08206 L atm per mol K * 288 K

d= 1.354 g /L

So the density at STP = 1.429 g/L

and Density at 1.00 atm and 15 C = 1.354 g/L

Learn more about density from the link given below.

https://brainly.com/question/29775886

#SPJ4

what pressure is exerted by 873.6 g of ch4 in a 0.950 l steel container at 232.9 k ?

Answers

The pressure exerted by 873.6 g of CH₄ in a 0.950 L steel container at 232.9 K is approximately 109,795.1 kPa.

To calculate the pressure exerted by a given amount of gas, we can use the ideal gas law equation:

PV = nRT

Where:

P = Pressure (in Pa or N/m²)

V = Volume (in m³)

n = Number of moles of gas

R = Ideal gas constant (8.314 J/(mol·K))

T = Temperature (in Kelvin)

First, let's convert the given mass of CH₄ (methane) to moles:

Molar mass of CH₄ = 12.01 g/mol + 4 * 1.008 g/mol = 16.04 g/mol

Number of moles (n) = 873.6 g / 16.04 g/mol

Next, convert the given volume to cubic meters:

Volume (V) = 0.950 L = 0.950 * 10⁻³ m³

Now, we have all the necessary values to calculate the pressure:

P = (nRT) / V

P = [(873.6 g / 16.04 g/mol) * (8.314 J/(mol·K)) * (232.9 K)] / (0.950 * 10⁻³ m³)

Performing the calculation:

P = (54.415 mol * 8.314 J/(mol·K) * 232.9 K) / (0.000950 m³)

P = 104,259.352 J / 0.000950 m³

P = 109,795,110.526 J/m³

Finally, convert the pressure to the desired unit of kilopascals (kPa):

P = 109,795,110.526 J/m³ * (1 kPa / 1000 J/m²)

P = 109,795.110526 kPa

Learn more about The ideal gas law: https://brainly.com/question/6534096

#SPJ11

Aiden goes out to lunch. The bill, before tax and tip, was $13. 15. A sales tax of 5% was added on. Aiden tipped 18% on the amount after the sales tax was added. How much was the sales tax? Round to the nearest cent

Answers

The sales tax on the bill, which was $13.15, can be calculated to be $0.66 when rounded to the nearest cent. Multiplying $13.81 by 18% (0.18) gives us $2.4966 the nearest cent, the tip amount is $2.50.

To calculate the sales tax, we need to find 5% of the bill amount. The bill amount before tax is $13.15, so multiplying it by 5% (0.05) gives us $0.6575. Rounding this to the nearest cent, we get $0.66.

Next, we need to calculate the amount after the sales tax was added. This can be done by adding the sales tax amount to the original bill amount: $13.15 + $0.66 = $13.81.

Finally, to calculate the tip, we need to find 18% of the amount after the sales tax was added. Multiplying $13.81 by 18% (0.18) gives us $2.4966. Rounding this to the nearest cent, the tip amount is $2.50.

To learn more about sales tax click here : brainly.com/question/29442509

#SPJ11

calculate the concentration of h3o at equilibrium if the initial concentration of hclo2 is 1.51×10−2 m

Answers

The concentration of H3O+ at equilibrium depends on the equilibrium constant of the reaction, which is not given.


To calculate the concentration of H3O+ at equilibrium, we need to know the equilibrium constant (Keq) of the reaction between HClO2 and water.

The balanced equation for the reaction is:

HClO2 + H2O ⇌ H3O+ + ClO2-

Assuming that the reaction is in a dilute aqueous solution at standard temperature and pressure, the equilibrium constant expression is:

Keq = [H3O+][ClO2-]/[HClO2][H2O]

Without knowing the value of Keq, we cannot calculate the concentration of H3O+ at equilibrium.

However, we do know that HClO2 is a weak acid and will only partially ionize in water, so the concentration of H3O+ at equilibrium will be less than the initial concentration of HClO2.

For more such questions on constant, click on:

https://brainly.com/question/19340344

#SPJ11

The concentration of H3O+ at equilibrium is 1.60×10^-2 M.

To calculate the  concentration of H3O+ at equilibrium, we need to use the equilibrium constant expression for the reaction: HClO2(aq) + H2O(l) ⇌ H3O+(aq) + ClO2-(aq). The equilibrium constant for this reaction is given by the expression: K = [H3O+][ClO2-]/[HClO2]. The initial concentration of HClO2 is given as 1.51×10^-2 M. Assuming that the change in concentration of H3O+ and ClO2- is "x" at equilibrium, the concentration of H3O+ at equilibrium can be calculated as [H3O+] = [ClO2-] = x and [HClO2] = 1.51×10^-2 - x. Substituting these values in the equilibrium constant expression and solving for "x" gives us the concentration of H3O+ at equilibrium as 1.60×10^-2 M.

learn more about Equilibrium here

brainly.com/question/30807709?

#SPJ11

draw the molecular shapes and predict the bond angles (relative to the ideal angles) of the following molecules. (b) PbCl2
shape:
bond angle:

Answers

The shape of PbCl2 molecule is linear because there are only two atoms (Pb and Cl) bonded to the central atom (Pb) with no lone pairs. The bond angle is 180 degrees, which is the ideal angle for a linear molecule.


For the molecule PbCl2, the molecular shape and bond angle are as follows:
Shape: Linear
Bond Angle: 180 degrees
In PbCl2, the central atom is lead (Pb) with two chlorine (Cl) atoms bonded to it. The molecule has a linear shape, resulting in a bond angle of 180 degrees, which is also the ideal angle for this molecular geometry.

To know more about bond angle visit:

https://brainly.com/question/31324226

#SPJ11

Propose a plausible mechanism for the following transformation. 1) EtMgBr 2)H3O+ . Identify the most likely sequence of steps in the mechanism: step 1: ____. step 2: ____. step 3: ____.

Answers

The given transformation involves the reaction of EtMgBr (ethylmagnesium bromide) followed by treatment with H3O+ (aqueous acid). This type of reaction is commonly known as an acidic workup.

The most likely sequence of steps in the mechanism for this transformation is as follows:

Step 1: Nucleophilic Addition

EtMgBr acts as a nucleophile and attacks the electrophilic carbon in the carbonyl group of the substrate. The mechanism involves the transfer of the ethyl group (-Et) from EtMgBr to the carbon atom, resulting in the formation of a tetrahedral intermediate.

Step 2: Protonation

In the presence of an acid such as H3O+, the tetrahedral intermediate is protonated. The acidic conditions provide a source of protons, and one of these protons is transferred to the oxygen atom of the tetrahedral intermediate. This step leads to the formation of an alcohol.

Step 3: Deprotonation

In the final step, another molecule of H3O+ acts as a proton donor and deprotonates the alcohol, resulting in the formation of the final product. This step restores the acidity of the reaction medium.

Overall, the proposed mechanism for the given transformation involves nucleophilic addition of EtMgBr, followed by protonation and subsequent deprotonation of the intermediate formed, leading to the desired product.

To know more about transformation refere here

https://brainly.com/question/11709244#

#SPJ11

What is the hybridization of carbon in each of the following (a)CO32- (b)C2O42-(c) NCO-

Answers

(a) The carbon in CO₃²⁻ has sp² hybridization. (b) The carbon in C₂O₄²⁻ has sp³ hybridization. (c) The nitrogen in NCO⁻ has sp hybridization.

To determine the hybridization of an atom, we need to look at the number of electron groups (bonded atoms and lone pairs) around the central atom. The hybridization describes how these electron groups are arranged in space.

(a) In CO₃²⁻, carbon is bonded to three oxygen atoms, and there is one lone pair on the carbon atom. This gives a total of four electron groups, which indicates sp² hybridization.

(b) In C₂O₄²⁻, each carbon atom is bonded to two oxygen atoms and there is a double bond between them. There are also two lone pairs on each carbon atom. This gives a total of four electron groups, which indicates sp³ hybridization.

(c) In NCO⁻, nitrogen is bonded to both carbon and oxygen atoms, and there is a triple bond between nitrogen and carbon. This gives a total of two electron groups, which indicates sp hybridization.

To know more about hybridization, refer here:

https://brainly.com/question/29020053#

#SPJ11

The standard curve was made by spectrophotographic analysis of equilibrated iron(III) thiocyanate solutions of known n. You are asked to analyze a Fe(SCN)2+ solution with an unknown concentration and an absorbance value of 0.409. The slope-intercept form of the equation of the line is y 4593.6x + 0.0152. The unknown was analyzed on the same instrument as the standard curve solutions at the same temperature. What is the Fe3+ concentration of the unknown solution?

Answers

The concentration of Fe3+ in the unknown solution is also 8.56 x 10^-5 M. To determine the Fe3+ concentration of the unknown solution, we first need to use the standard curve equation to calculate the concentration of Fe(SCN)2+ in the unknown solution.

From the given information, we know that the absorbance value of the unknown solution is 0.409 and the slope-intercept form of the equation of the line is y = 4593.6x + 0.0152.

To find x (the concentration of Fe(SCN)2+ in the unknown solution), we can rearrange the equation as follows:

y = 4593.6x + 0.0152

0.409 = 4593.6x + 0.0152

0.3938 = 4593.6x

x = 8.56 x 10^-5 M

Now that we know the concentration of Fe(SCN)2+ in the unknown solution, we can use the stoichiometry of the reaction (Fe(SCN)2+ + Fe3+ -> Fe(SCN)2+ + Fe2+) to determine the concentration of Fe3+.

From the balanced equation, we know that for every 1 mole of Fe(SCN)2+, there is 1 mole of Fe3+. Therefore, the concentration of Fe3+ in the unknown solution is also 8.56 x 10^-5 M.

For more such questions on solution

https://brainly.com/question/22688504

#SPJ11

The Fe3+ concentration of the unknown solution is 0.0158 M.

The equation of the line for the standard curve is given as y = 4593.6x + 0.0152, where y is the absorbance and x is the concentration of Fe(SCN)2+ in M. The absorbance of the unknown solution is given as 0.409. We can use the equation of the line to find the concentration of Fe(SCN)2+ in the unknown solution as follows:

0.409 = 4593.6x + 0.0152

0.3938 = 4593.6x

x = 0.0000856 M

Since the unknown solution contains Fe(SCN)2+, and each mole of Fe(SCN)2+ contains one mole of Fe3+, the concentration of Fe3+ in the unknown solution is also 0.0000856 M or 0.0158 M when multiplied by a factor of two. Therefore, the Fe3+ concentration of the unknown solution is 0.0158 M.

learn more about solution here:

https://brainly.com/question/30665317

#SPJ11

-. A student is investigating the volume of hydrogen gas produced when various


metals react with hydrochloric acid. The student uses an electronic balance to


determine that the mass of a sample of zinc metal is 16. 35 g. How many moles


of zinc are in this sample?

Answers

To determine the number of moles of zinc in a sample with a mass of 16.35 g, we need to use the molar mass of zinc. Zinc (Zn) has a molar mass of approximately 65.38 g/mol.

The number of moles can be calculated using the formula:

Number of moles = Mass of sample / Molar mass

Substituting the given values:

Number of moles = 16.35 g / 65.38 g/mol

Calculating the result: Number of moles = 0.25 mol

Therefore, there are approximately 0.25 moles of zinc in the 16.35 g sample. The molar mass is used to convert the mass of a substance to moles.

It represents the mass of one mole of a substance and is calculated by summing up the atomic masses of all the atoms in its chemical formula. In the case of zinc, the molar mass is determined by the atomic mass of zinc (65.38 g/mol). Knowing the number of moles is essential for various calculations, such as determining the stoichiometry of reactions, calculating the concentration of a substance, and understanding the relationships between reactants and products in a chemical equation.

Learn more about moles of zinc  here

https://brainly.com/question/9476184

#SPJ11

Look up phase diagram for following alloys a. Mg-Al, b. Mg-Li a. for each system calculate, partition co-efficient for solidification at eutectic temperature b. will you expect a single value of k for Mg- Al alloy, b. Mgli alloy? c. For Mg-2 at% alloy, what will be composition of first solid formed and what will be composition for solid formed just before eutectic temp (complete mixing in solid and liquid)

Answers

a) Mg-Al Alloy:  phase diagram shows a eutectic point at around 12 wt% Al and 425°C ; b) Mg-Li Alloy: multiple eutectic points and peritectic reaction ; c) Mg-2 at% Alloy: composition very close to eutectic composition (12 wt% Al).

a) Mg-Al Alloy: The phase diagram for the Mg-Al alloy shows a eutectic point at around 12 wt% Al and 425°C. This means that at this composition and temperature, the alloy will solidify into two distinct phases - one that is rich in Mg and one that is rich in Al.
In the case of the Mg-Al alloy, the partition coefficient will depend on the exact composition and temperature of the alloy, as well as the proportions of the two phases that form during solidification.

b) Mg-Li Alloy: The phase diagram for the Mg-Li alloy is a bit more complex than that of the Mg-Al alloy, with multiple eutectic points and a peritectic reaction. However, similar to the Mg-Al alloy, the partition coefficient for solidification at the eutectic temperature can be calculated using the lever rule.

c) Mg-2 at% Alloy:  As for the composition of the solid formed just before the eutectic temperature, again this will depend on the cooling rate and other conditions. However, assuming slow cooling and complete mixing, the composition should be very close to the eutectic composition (12 wt% Al). This can be determined by reading the phase diagram and finding the temperature at which the eutectic reaction occurs.

In summary, the partition coefficient for solidification at the eutectic temperature will depend on the exact composition and temperature of the alloy.

To know more about eutectic point, refer

https://brainly.com/question/20726392

#SPJ11

how many moles of electrons must be transferred through a cell in order to accumulate a total charge of 70,500 c? faraday’s constant=96,485c mol−1

Answers

Answer:We can use the formula:

moles of electrons = total charge / Faraday's constant

Plugging in the given values, we get:

moles of electrons = 70,500 C / 96,485 C/mol

moles of electrons = 0.731 mol (rounded to three decimal places)

Therefore, 0.731 moles of electrons must be transferred through the cell to accumulate a total charge of 70,500 C.

learn more about  moles of electrons

https://brainly.com/question/27267351?referrer=searchResults

#SPJ11

For the reaction 3Fe2O3(s) + H2(g)=2Fe3O4(s) + H2O(g) H° = -6.0 kJ and S° = 88.7 J/K The equilibrium constant for this reaction at 297.0 K is _________. Assume that H° and S° are independent of temperature.

Answers

The equilibrium constant for this reaction at 297.0 K is approximately 2.98 x 10^6.

For the reaction 3Fe2O3(s) + H2(g) = 2Fe3O4(s) + H2O(g), we can determine the equilibrium constant at 297.0 K using the given values for the enthalpy change (H°) and the entropy change (S°). We can use the Gibbs free energy equation to find the equilibrium constant:
ΔG° = ΔH° - TΔS°
where ΔG° is the Gibbs free energy change, ΔH° is the enthalpy change, T is the temperature in Kelvin, and ΔS° is the entropy change. At equilibrium, ΔG° = 0, so we can solve for the equilibrium constant (K) using:
0 = ΔH° - TΔS°
ΔH° = TΔS°
K = e^(-ΔG°/RT)
Using the given values, ΔH° = -6.0 kJ = -6000 J and ΔS° = 88.7 J/K. The temperature is given as 297.0 K. We can now calculate ΔG°:
ΔG° = -6000 J - (297.0 K)(88.7 J/K) = -6000 J - 26335.9 J = -32335.9 J
Now, we can find the equilibrium constant K using the equation K = e^(-ΔG°/RT), where R is the ideal gas constant (8.314 J/mol K):
K = e^(-(-32335.9 J)/[(8.314 J/mol K)(297.0 K)]) = e^(32335.9 J / 2467.938 J) ≈ 2.98 x 10^6
Thus, the equilibrium constant for this reaction at 297.0 K is approximately 2.98 x 10^6.

To know more about Equilibrium constant visit:

https://brainly.com/question/10038290

#SPJ11

Suppose the concentrations of all reactants is kept the same, but the temperature is raised by from to:

Answers

Certainly! In a chemical reaction, the temperature plays a significant role in determining the rate and extent of the reaction. When the temperature is increased, several changes occur due to the higher energy level within the system.

Firstly, raising the temperature increases the average kinetic energy of the reactant molecules. This results in more frequent and energetic collisions between the reactant particles, which in turn increases the reaction rate.

According to the Arrhenius equation, an increase in temperature leads to a higher rate constant, meaning the reaction proceeds faster.

Moreover, a higher temperature provides more thermal energy to overcome the activation energy barrier required for the reaction to occur. This allows a larger fraction of reactant molecules to possess sufficient energy for successful collisions and formation of products.

Consequently, the equilibrium position of the reaction may shift towards the products, resulting in a higher yield of desired products.

However, it's important to note that not all reactions respond similarly to temperature changes. Some reactions may be exothermic, releasing heat energy, while others may be endothermic, absorbing heat energy. In exothermic reactions, an increase in temperature can decrease the equilibrium yield, as the forward reaction is favored to release excess heat.

Conversely, an increase in temperature can favor the endothermic reaction in endothermic reactions, resulting in a higher equilibrium yield of products.

In summary, raising the temperature in a chemical reaction generally leads to an increase in the reaction rate and can affect the equilibrium position, depending on the nature of the reaction and whether it is exothermic or endothermic.

To know more about chemical reaction refer here

https://brainly.com/question/17863827#

#SPJ11

Another possible insulator for a computer chip is silicon nitride, Si3N4. The 101 J/mol- thermodynamic data needed for Sí:N4 is ΔΗο298--744 kJ/mole and ΔS":98 K. Find the temperatures at which this reaction is spontaneous: Si (s) + 2 N2 (g) → SiN, (s) MOI- 144000 iOI

Answers

The temperatures at which the reaction of Si (s) + 2 N₂ (g) → Si₃N₄ (s) is spontaneous can be found using the equation ΔG⁰ = ΔH⁰ - TΔS⁰.

At the temperature where ΔG⁰ is equal to zero, the reaction becomes spontaneous. Rearranging the equation gives T = ΔH⁰/ΔS⁰. Plugging in the values for ΔH⁰ and ΔS⁰, we get T = 744 kJ/mole / (101 J/mol-K * 2) = 368 K or 95°C. Therefore, at temperatures higher than 368 K or 95°C, the reaction of Si (s) + 2 N₂ (g) → Si₃N₄ (s) will be spontaneous.

In simpler terms, the temperature at which this reaction becomes spontaneous can be found using the formula T = ΔH⁰/ΔS⁰. Plugging in the values given for Si₃N₄, we get a temperature of 368 K or 95°C. This means that at temperatures higher than 95°C, the reaction will occur naturally without the need for any external energy input.

To know more about spontaneous click on below link:

https://brainly.com/question/5372689#

#SPJ11

Cell potential from complex formation: 0.398
Explain WHY the potential changes as it does with the addition of NH3(aq).

Answers

The cell potential from complex formation is 0.398, and the potential changes with the addition of NH₃(aq) due to the formation of a new complex.

The cell potential from complex formation is a measure of the energy released or absorbed when a complex ion is formed from its constituent ions. When NH₃(aq) is added to the system, it can coordinate with one or more of the ions to form a new complex ion.

This can change the overall charge of the complex and its stability, leading to a change in the cell potential.

For example, if the original complex had a positive charge, the addition of NH₃(aq) could lead to the formation of a negatively charged complex, which would increase the stability of the complex and decrease the overall cell potential.

Alternatively, if the original complex had a negative charge, the addition of NH₃(aq) could lead to the formation of a neutral or positively charged complex, which would decrease the stability of the complex and increase the overall cell potential.

To know more about cell potential, refer here:

https://brainly.com/question/1313684#

#SPJ11

(5)
In most organisms, the end product of glycolysis is pyruvate. Pyruvate still has a substantial amount of energy in it that can further be extracted. Depending on whether the organisms are operating under aerobic or anaerobic conditions, pyruvate undergoes further oxidation to produce more ATP, resulting in different end products.
Sort the following items according to whether they are reactants or products in the anaerobic reduction of pyruvate that takes place in animal muscles during strenuous exercise.
Drag each item to the appropriate bin.
A. Pyruvate
B. NAD+
C. Lactate
D. NADH

Answers

In the anaerobic reduction of pyruvate that takes place in animal muscles during strenuous exercise, the reactants are A. Pyruvate and B. NAD+, while the products are C. Lactate and D. NADH.


Under anaerobic conditions, animal muscles perform a process called lactic acid fermentation. The reactants for this process are pyruvate (A) and NAD+ (B). Pyruvate is the end product of glycolysis, while NAD+ is a coenzyme that acts as an electron carrier.

The lactic acid fermentation involves the reduction of pyruvate to lactate (C) using NADH (D) as a reducing agent. NADH is oxidized back to NAD+ during this process. This regeneration of NAD+ allows glycolysis to continue, producing ATP to provide energy for the cells during strenuous exercise.

In summary, the reactants for anaerobic reduction of pyruvate in animal muscles are A. Pyruvate and B. NAD+, while the products are C. Lactate and D. NADH.

Learn more about anaerobic here:

https://brainly.com/question/11451338

#SPJ11

which response has the following substances arranged in order of decreasing boiling point? a) gecl4. b) ch4. c) sicl4. d) sih4. e) gebr4.

Answers

The correct order of decreasing boiling point of the given compounds is CH₄ < SiH₄ < SiCl₄ < GeCl₄ < GeBr₄

We consider the molecular weights of the elements involved, as larger molecules tend to have higher boiling points. Then we look at the molecular structure and intermolecular forces, such as dipole-dipole interactions and van der Waals forces. The strength of intermolecular forces and thus the effect on boiling points is in the order ionic > non ionic dispersion > dipole dipole > hydrogen bonding. Based on molecular weights and intermolecular forces, we can arrange the substances in order of decreasing boiling point as listed above.

For more questions on boiling point: https://brainly.com/question/31647217

#SPJ11

Balanced chemical reaction
2Ferrocene + 2Acetyl Chloride -----AlCl3---> Monoacetyl ferrocene + Diacetyl ferrocene.
Assuming that your reaction has produced both monoacetyl and diacetyl ferrocene, calculate the theoretical yield and percent yield for the pure monoacetyl ferrocene product. Indicate the limiting reagent in this reaction. Show all stoichiometric calculations including the number of moles, theoretical yield and percent yield
Mass of monoacetylated ferrocene = 0.0384 g
Mass of diacetylated ferrocene = 0.568 g
Mass of dried product(crude)= 0.1072 g

Answers

Limiting reagent: Ferrocene. Theoretical yield: 0.0476 g. Percent yield: 80.7% (0.0384 g of monoacetyl ferrocene).


In this reaction, the limiting reagent is Ferrocene, as it has a smaller mole ratio (2:1) compared to Acetyl Chloride (2:2). To find the theoretical yield of monoacetyl ferrocene, we first need to calculate the number of moles of Ferrocene.
(0.1072 g crude product - 0.568 g diacetyl ferrocene) / 228.08 g/mol (molar mass of Ferrocene) = 0.000203 mol Ferrocene
Using stoichiometry, we can find the theoretical yield of monoacetyl ferrocene:
0.000203 mol Ferrocene * (1 mol monoacetyl ferrocene / 2 mol Ferrocene) * 228.08 g/mol (molar mass of monoacetyl ferrocene) = 0.0476 g
Percent yield is calculated as follows:
(0.0384 g actual yield / 0.0476 g theoretical yield) * 100 = 80.7%

For more such questions on Ferrocene, click on:

https://brainly.com/question/13566015

#SPJ11

Ferrocene is the limiting agent. Yield in theory: 0.0476 g. yield of 0.0384 g of monoacetyl ferrocene, or 80.7%.

Ferrocene is the limiting agent in this reaction because its mole ratio is lower (2:1) than that of Acetyl Chloride (2:2) in this reaction. We must first determine the theoretical yield of monoacetyl ferrocene by counting the moles of the compound.

0.000203 mol Ferrocene is equal to (0.1072 g crude product - 0.568 g diacetyl ferrocene) / 228.08 g/mol (molar mass of Ferrocene).

We may calculate the theoretical yield of monoacetyl ferrocene using stoichiometry:

1 mole of monoacetyl ferrocene divided by 2 moles of ferrocyanide results in 0.000203 mol ferrocyanide, which is equal to 0.0476 g.

These steps are used to calculate percent yield:

(0.0476 g predicted yield divided by 0.0384 g actual yield) multiplied by 100 = 80.7%

learn more about Ferrocene here:

https://brainly.com/question/17084447

#SPJ11

the mobility of a chloride ion in aqueous solution at 25 °c is 7.91 × 10−8 m2 s−1 v−1

Answers

The mobility of a chloride ion in aqueous solution at 25°C is [tex]7.91 \times 10^{-8} m^2 s^{-1} V^{-1}[/tex], representing how quickly the ion moves through the solution under an electric field.

The mobility of a chloride ion in aqueous solution at 25°C is [tex]7.91 \times 10^{-8} m^2 s^{-1} V^{-1}.[/tex]

Mobility is a measure of how quickly an ion moves through a solution under the influence of an electric field. It is typically measured in units of square meters per second per volt [tex](m^2 s^{-1} V^{-1})[/tex].

The mobility of a chloride ion in aqueous solution can be influenced by factors such as temperature, concentration, and the presence of other ions or solutes in the solution. At 25°C, the value given[tex](7.91 \times 10^{-8} m^2 s^{-1} V^{-1})[/tex] represents the average mobility of a chloride ion in aqueous solution at that temperature.

Learn more about mobility of a chloride ion: brainly.com/question/31969800

#SPJ11

To synthesize polyethylene glycol, or Carbowax [(-CH-CH20-)], which monomer and initiator can be used most efficiently? A. ethylene with radical initiator; B. ethane-1,2-diol with basic initiator; C. 1,2-epoxyethane with basic initiator;
D. ethane-1,2-diol with acidic initiator; E. 1,2-epoxyethane with radical initiator.

Answers

The most efficient monomer and initiator combination for synthesizing PEG is 1,2-epoxyethane with a radical initiator.

Polyethylene glycol (PEG) is a synthetic polymer that is produced by polymerizing the monomer ethylene oxide.  This is because 1,2-epoxyethane has a higher reactivity towards radical polymerization than ethylene or ethane-1,2-diol. Additionally, a radical initiator is preferred over a basic or acidic initiator as it allows for a greater degree of control over the polymerization reaction. Carbowax, which is a trade name for PEG, is a versatile polymer that is used in a wide range of applications, including pharmaceuticals, cosmetics, and industrial processes. Its properties, such as its high solubility in water and ability to form stable emulsions, make it a valuable material in these industries. In conclusion, the most efficient monomer and initiator combination for synthesizing PEG is 1,2-epoxyethane with a radical initiator.

To know more about monomer visit:

https://brainly.com/question/18784783

#SPJ11

fill in the blank. during the electrolysis of a na2so4 solution with a few drops of phenolphthalein, the solution turns pink around an electrode. this observation indicates that water is being _ at that electrode.

Answers

During the electrolysis of a Na2SO4 solution with a few drops of phenolphthalein, the solution turns pink around an electrode. This observation indicates that water is being oxidized at that electrode.

The pink color around the electrode indicates the presence of hydroxide ions ([tex]OH^-[/tex]) produced by the reaction of water molecules with the electrons generated at the electrode. In this case, water is being oxidized, which means it loses electrons, at the anode (positive electrode) to form oxygen gas ([tex]O_2[/tex]), hydrogen ions ([tex]H^+[/tex]), and electrons ([tex]e^-[/tex]).

The overall chemical reaction at the anode can be written as:

[tex]2H_2O(l) -> O_2(g) + 4H^+(aq) + 4e^-[/tex]

However, The [tex]H^+[/tex] ions produced in the reaction will react with the [tex]SO_4^2^-[/tex] ions present in the solution to form sulfuric acid ([tex]H_2SO_4[/tex]), which makes the solution acidic and turns the phenolphthalein pink. This observation indicates that water is being oxidized at that electrode.

To know more about Electrolysis refer here :

https://brainly.com/question/12994141

#SPJ11

KOH is an excellent drying agent for some organic compounds. Would it be a better choice for a carboxylic acid (RCOOH) or an amine (RNH2)? Why?

Answers

KOH may be a better choice for drying amines than carboxylic acids due to the differing chemical properties and hygroscopic nature of these functional groups.

However, it is important to consider the specific properties of the organic compound being dried and to use the appropriate drying agent based on its chemical nature.

KOH (potassium hydroxide) is a strong base that is commonly used as a drying agent for organic solvents due to its ability to react with water to form potassium hydroxide and water.

However, its effectiveness as a drying agent for carboxylic acids (RCOOH) and amines (RNH2) may differ due to their differing chemical properties.

In general, carboxylic acids are more acidic and polar than amines, and they can form hydrogen bonds with water more easily. As a result, carboxylic acids tend to be more hygroscopic (water-absorbing) than amines, and they can be more difficult to dry completely.

KOH may react with carboxylic acids to form salts and water, which can reduce the drying efficiency and potentially alter the chemical properties of the carboxylic acid.

On the other hand, amines are generally less acidic and less polar than carboxylic acids, and they may not form strong hydrogen bonds with water.

Therefore, amines may be more easily dried with KOH as a drying agent, as the base can react with any water present to form potassium hydroxide and water, leaving the amine dry.

To know more about carboxylic Acid refer here :-

https://brainly.com/question/31377595#

#SPJ11

fill in the left side of this equilibrium constant equation for the reaction of azetidine c3h6nh, a weak base, with water.

Answers

The reaction of azetidine (C₃H₆NH), a weak base, with water involves the formation of the conjugate acid C₃H₆NH²⁺. The remaining species on the left side of the equilibrium constant equation can include unreacted azetidine and water molecules.

The reaction of azetidine (C₃H₆NH) with water can be represented as follows:

C₃H₆NH + H₂O ⇌ ?

To fill in the left side of the equilibrium constant equation, we need to determine the products formed during the reaction. When azetidine, a weak base, reacts with water, it can act as an acid by donating a proton (H+). Therefore, one possible product of the reaction is the conjugate acid of azetidine, which can be represented as C₃H₆NH²⁺.

Thus, we can write the left side of the equilibrium constant equation as:

C₃H₆NH + H₂O ⇌ C₃H₆NH²⁺ + ?

The "?" represents the remaining species on the left side of the equation, which could include any unreacted azetidine or water molecules.

To know more about the azetidine refer here :

https://brainly.com/question/31492614#

#SPJ11

Other Questions
the chain of custody protects against the _____________ of evidence as a result of investigators losing control of it. shredding possible corruption leaking unauthorized distribution In statistical inference, a hypothesis test uses sample data to evaluate a statement abouta. the unknown value of a statisticb. the known value of a parameterc. the known value of a statisticd. the unknown value of a parameter In the context of cell differentiation, what is a stem cell? a differentiated cell that can be converted to a variety of other specialized cell types a differentiated cell that cannot be converted to other cell types an undifferentiated cell that cannot perform cell divisionan undifferentiated cell that can perform cell division what happens when you add an additional email account in outlook (1 point) find the matrix aa of the linear transformation t(f(t))=71f(t)dt t(f(t))=17f(t)dt from p3p3 to rr with respect to the standard bases for p3p3 and rr. a=a= [[ ] Calculate the gauge pressure at a depth of 690 m in seawater a bag contains 6 red marbles, 4 blue marbles, and 1 green marble. what is the probability of choosing a marble that is not blue? question content area bottom part 1 a. 7 11 b. 11 7 c. 4 11 d. If m acd = (7x-12) and m bdc = (10x 5) find x even if the use of nets that selectively catch larger fish were stopped, some biologists believe that the size distribution in the fish population would not return to normal. explain why. Design an experiment that shows how average wind speeds change over different types of surfaces. For more help, refer to the Skill Handbook. An aqueous solution containing 5% by weight of urea and 10% by weight of glucose. What will be its freezing point (Kf=1.86 Kkgmol). protein gels can be used for further analysis in assays such as ______ . A patient who has diabetes is taking pioglitazone (Actos). The nurse practitioner must remember:a. check a CBC in 3 monthsb. order liver function studies in about 2-3 monthsc. screen for microalbuminuriad. wean off metformin Which of the following device receives ingress packets from one port and sends the same out to all other ports and operates at layer-1 of the OSI model?a.firewallb.routerc.switchd.hub draw a balanced chemical equation for the reaction. include drawings of the stuctures of the reactant and both possible isomers of the product (e,z and e,e). Taylor Polynomial: Consider the approximation of the exponential by its third degree Taylor Polynomial: exP3(x)=1+x+x22+x36Compute the error exP3(x) for various values of x:a. e0P3(0) something beyond beyond knowledge compels our interest and ability to be moved by a poem"" explanation of this quote Watt Power and Light, an electric company, is an example of a natural monopoly. It will suffer an economic loss:a. if regulators insist that it produce where price equals marginal cost because average cost is always less than marginal cost.b. irrespective of the price it charges because average cost is always less than marginal cost.c. if regulators insist that it produce where price equals marginal cost because marginal cost is less than average cost.d. if regulators insist that it produce where price equals average cost because average cost is always less than marginal cost.e. irrespective of the output it produces because marginal cost is always less than average cost. a monopolist faces the demand function qd = 100 4p. the monopolist has cost function c(q) = 4q. A nurse observes a student nurse taking a copy of a client's medication administration record. When questioned, the student states, Another student is scheduled to administer medications for this client tomorrow, so I am going to make a copy to help my friend prepare for tomorrow's clinical. What response should the nurse provide first?A. Ask the nursing supervisor to meet with the students.B. Notify the student's clinical instructor of the situation.C. Ask the student if permission was obtained from the client.D. Explain that the records are hospital property and may not be removed.